A fast, next-generation multi-platform compiler, deployer, and monitor for embedded development, directly compatible with platformio.ini.

CI status

Per-platform board build badges (click to expand)

AVR

MegaAVR

Renesas

ESP8266

ESP32

CH32V (RISC-V)

CH32X (RISC-V, USB PD)

Teensy

STM32

SAM / SAMD

RP2040 / RP2350

Nordic NRF52

Apollo3

Silicon Labs

NRF52

Raspberry Pi Pico

Silicon Labs

Board descriptions and family deep-dives live in docs/BOARD_STATUS.md.

fbuild

fbuild is a next-generation embedded development tool featuring a clean, extensible, data-driven architecture. It provides fast incremental builds, URL-based package management, and comprehensive multi-platform support for Arduino and ESP32 development.

platformio.ini compatible — fbuild uses the same platformio.ini already used in your PlatformIO sketches.

Current status: v2.0.6 — Rust rewrite. Full ESP32 / Teensy support with a working build system.

Docs index

For a full FAQ-style map of every doc in this repo, see docs/INDEX.md. Common entry points:

• Why fbuild exists, key benefits, performance → docs/WHY.md
• Is my board supported? → docs/BOARD_STATUS.md
• Architecture / daemon / serial internals → docs/architecture/ (start at overview.md)
• Crate dependency graph → crates/CLAUDE.md
• Testing, troubleshooting, local setup → docs/DEVELOPMENT.md
• Design decisions (ADRs) → docs/DESIGN_DECISIONS.md
• Implementation roadmap → docs/ROADMAP.md

Installation

# Install from PyPI
pip install fbuild

# Or install from source
git clone https://github.com/fastled/fbuild.git
cd fbuild
pip install -e .

Quick Start

Build an Arduino Uno project

1. Create project structure:

   mkdir my-project && cd my-project
   mkdir src

2. Create platformio.ini:

   [env:uno]
   platform = atmelavr
   board = uno
   framework = arduino

3. Write your sketch (src/main.ino):

   void setup() {
     pinMode(LED_BUILTIN, OUTPUT);
   }
   
   void loop() {
     digitalWrite(LED_BUILTIN, HIGH);
     delay(1000);
     digitalWrite(LED_BUILTIN, LOW);
     delay(1000);
   }

4. Build:

   fbuild build

On first build, fbuild will download the AVR-GCC toolchain (~50MB, one-time), download the Arduino AVR core (~5MB, one-time), compile your sketch, and emit firmware.hex under .fbuild/build/uno/.

Build time: ~19s first build, ~3s subsequent builds, <1s incremental.

Examples

Build, deploy, and monitor in one command:

# Default action: build + deploy
fbuild tests/platform/esp32c6

# Default action: build + deploy + monitor
fbuild tests/platform/esp32c6 --monitor

Deploy commands:

# Deploy with clean build
fbuild deploy tests/platform/esp32c6 --clean

# Deploy with monitoring and test patterns
fbuild deploy tests/platform/esp32c6 \
  --monitor="--timeout 60 --halt-on-error \"TEST FAILED\" --halt-on-success \"TEST PASSED\""

# Deploy to the default emulator backend
fbuild deploy tests/platform/uno -e uno --to emu

# Deploy to the default emulator backend and open the monitor page
fbuild deploy tests/platform/uno -e uno --to emu --monitor

# Deploy ESP32-S3 to the default emulator backend
fbuild deploy tests/platform/esp32s3 -e esp32s3 --to emu --monitor --timeout 10 --verbose

# Deploy to an explicit emulator backend
fbuild deploy tests/platform/esp32s3 -e esp32s3 --to emu --emulator qemu --monitor --timeout 10

test-emu — build + run in emulator in one step (CI-friendly, exits with emulator exit code):

# Auto-detect emulator backend from the board
fbuild test-emu tests/platform/uno -e uno

# Explicit backend, with pattern matching
fbuild test-emu tests/platform/esp32s3 -e esp32s3 --emulator qemu --timeout 10

# AVR with simavr backend
fbuild test-emu tests/platform/mega -e megaatmega2560 --emulator simavr

# Halt on first test result
fbuild test-emu tests/platform/uno -e uno \
  --halt-on-success "TEST PASSED" --halt-on-error "TEST FAILED"

Option	Description
--emulator <backend>	Force backend: avr8js, qemu, or simavr (auto-detected if omitted)
--timeout <secs>	Kill the emulator after N seconds
--halt-on-success <regex>	Stop and report pass when pattern matches
--halt-on-error <regex>	Stop and report fail when pattern matches
--expect <regex>	Require this pattern in output (fail on timeout if missing)
--no-timestamp	Disable timestamp prefix on output lines
-v, --verbose	Show emulator command and build details

Monitor command:

# Monitor serial output with pattern matching
fbuild monitor --timeout 60 --halt-on-error "TEST FAILED" --halt-on-success "TEST PASSED"

Serial monitoring requires pyserial to attach to the USB device. Port auto-detection works similarly to PlatformIO.

Emulator testing

fbuild can build and run firmware in emulators without physical hardware. Two entry points:

• fbuild test-emu — one-shot build + emulate + exit (CI-friendly)
• fbuild deploy --to emu — deploy flow with optional --monitor

Both auto-detect the emulator backend from the board, or accept --emulator <backend>.

Emulator backends

Backend	Platforms	MCUs	Requirements
avr8js	AtmelAVR	ATmega328P	Node.js (bundled headless script)
simavr	AtmelAVR, MegaAVR	ATmega2560, ATmega32U4, and others	simavr binary on PATH
qemu	Espressif32	ESP32, ESP32-S3 (Xtensa); ESP32-C3, ESP32-C6, ESP32-H2 (RISC-V)	Native QEMU (auto-downloaded)

Auto-detection rules when --emulator is omitted:

• ATmega328P defaults to avr8js (no external binary needed)
• Other AVR MCUs with simavr in debug_tools default to simavr
• ESP32, ESP32-S3 (Xtensa) and ESP32-C3, ESP32-C6, ESP32-H2 (RISC-V) default to qemu

QEMU notes

ESP32-family QEMU runs from a normal Arduino environment. fbuild launches the correct Espressif QEMU binary (qemu-system-xtensa for ESP32/ESP32-S3; qemu-system-riscv32 for ESP32-C3/C6/H2) based on the selected board. The required QEMU build flags are injected automatically when deploying to --to emu.

[env:esp32s3]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.34/platform-espressif32.zip
board = esp32-s3-devkitc-1
framework = arduino
board_build.flash_mode = dio
board_upload.flash_mode = dio

[env:esp32c3]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.34/platform-espressif32.zip
board = esp32-c3-devkitm-1
framework = arduino
board_build.flash_mode = dio
board_upload.flash_mode = dio

QEMU requires DIO flash mode. Boards configured with qio or qout will fail fast before building.

QEMU runtime is native-only. Supported hosts: Linux x86_64/arm64, macOS x86_64/arm64, Windows x86_64. On Windows, fbuild stages the required QEMU runtime DLLs for the managed install.

Known limitations:

1. ESP32 QEMU supports ESP32, ESP32-S3 (Xtensa) and ESP32-C3, ESP32-C6, ESP32-H2 (RISC-V). ESP32-S2 and ESP32-P4 are not yet supported by upstream Espressif QEMU.
2. QEMU-specific firmware patching: fbuild patches the generated ESP32-S3 app image for QEMU to bypass an ADC calibration constructor that hangs under emulation, then repairs the image checksum and hash. RISC-V variants (C3/C6/H2) do not require this patch.
3. Performance: QEMU emulation is slower than real hardware. Use it for functional validation, not timing-sensitive behavior.
4. Peripheral coverage: Not all peripherals are fully emulated. Real hardware is still required for production validation.

CLI Usage

Build

# Build with auto-detected environment
fbuild build

# Build a specific environment
fbuild build --environment uno
fbuild build -e mega

# Clean build (remove all build artifacts)
fbuild build --clean

# Verbose output (shows all compiler commands)
fbuild build --verbose

# Build in a different directory
fbuild build --project-dir /path/to/project

Typical output:

Building environment: uno
Downloading toolchain: avr-gcc 7.3.0-atmel3.6.1-arduino7
Downloading: 100% ████████████████████ 50.1MB/50.1MB
Extracting package...
Toolchain ready at: .fbuild/cache/...
Downloading Arduino core: 1.8.6
Compiling sketch...
Compiling Arduino core...
Linking firmware...
Converting to Intel HEX...

✓ Build successful!

Firmware: .fbuild/build/uno/firmware.hex
Program: 1058 bytes (3.3% of 32256 bytes)
RAM: 9 bytes (0.4% of 2048 bytes)
Build time: 3.06s

Configuration

platformio.ini summary

Minimal configuration:

[env:uno]
platform = atmelavr
board = uno
framework = arduino

Fuller configuration:

[platformio]
default_envs = uno

[env:uno]
platform = atmelavr
board = uno
framework = arduino
upload_port = COM3
monitor_speed = 9600
build_flags =
    -DDEBUG
    -DLED_PIN=13
lib_deps =
    https://github.com/FastLED/FastLED
    https://github.com/adafruit/Adafruit_NeoPixel

Library dependencies

fbuild supports downloading and compiling Arduino libraries directly from GitHub URLs:

[env:uno]
platform = atmelavr
board = uno
framework = arduino
lib_deps =
    https://github.com/FastLED/FastLED

Features:

• Automatic GitHub URL optimization (converts repo URLs to zip downloads)
• Automatic branch detection (main vs master)
• Proper Arduino library structure handling
• LTO (Link-Time Optimization) for optimal code size
• Support for complex libraries with assembly optimizations

Key features

• URL-based package management — direct URLs to toolchains and platforms, no hidden registries
• Library management — download and compile Arduino libraries from GitHub URLs
• Fast incremental builds — 0.76s rebuilds, 3s full builds (cached)
• LTO support — Link-Time Optimization for optimal code size
• Transparent architecture — know exactly what's happening at every step
• Real downloads, no mocks — all packages are real, validated, and checksummed
• Cross-platform — Windows, macOS, and Linux
• platformio.ini compatible — drop-in replacement for PlatformIO builds

See docs/WHY.md for the full rationale, benefits, and performance benchmarks.

Supported platforms

fbuild supports AVR, MegaAVR, Renesas RA, ESP8266, ESP32 (all variants incl. S2/S3/C2/C3/C5/C6/H2/P4), CH32V/CH32X RISC-V, Teensy (LC–4.1), STM32, Atmel SAM/SAMD, RP2040/RP2350, Nordic NRF52, Apollo3, Silicon Labs EFR32, and WASM via Emscripten.

For the live per-platform CI badge matrix, per-board status, and family deep-dives, see docs/BOARD_STATUS.md.

Project structure

The repo is a Rust workspace. For the full crate dependency graph and per-crate responsibilities, see crates/CLAUDE.md.

A typical user project on disk looks like:

my-project/
├── platformio.ini       # Configuration file
├── src/
│   ├── main.ino         # Your Arduino sketch
│   └── helpers.cpp      # Additional C++ files
└── .fbuild/             # Build artifacts (auto-generated)
    ├── cache/
    │   ├── packages/    # Downloaded toolchains
    │   └── extracted/   # Arduino cores
    └── build/
        └── uno/
            ├── src/           # Compiled sketch objects
            ├── core/          # Compiled Arduino core
            └── firmware.hex   # Final output ← upload this

Architecture

Architecture docs are decentralized under docs/architecture/. Start with overview.md, then read the subsystem-specific docs listed in docs/CLAUDE.md.

Development

Testing, troubleshooting, linting, and local setup instructions live in docs/DEVELOPMENT.md. Project-wide rules for contributors and LLM agents are in CLAUDE.md.

License

In the spirit of Dan Garcia's permissively licensed software, fbuild is presented as free software.

BSD 3-Clause License